Integrirano pojačalo - Luxman - L-590 aX mark 2

Cijena:  upit

Raspoloživost: upit

Luxman L590aX Mark 2 integrirano je pojačalo najviše klase. Top model integriranih pojačala sa topologijom rada u čistoj A klasi. Superorna patentirana Lecua kontrola glasnoće, ugrađena MM/MC gramofonska sekcija, maksimalan komfor rukovanja, izrada najviše klase te potpuna pouzdanost u radu, samo su neki od razloga za odabir. Kako A klasa razvija višu temperaturu, Luxman je razvio visoko kvalitetno pasivno hlađenje, te temperatura gornje ploče nikada ne prelazi 32 stupnja. Pritiskom tipke pretvara se u izlazno pojačalo ili predpojačalo, te je u stvari kombinacija tri aparata. Kada spomenemo implementiranu gramofonsku sekciju za sve vrste zvučnica, te ulaz za slušalice, jasno je da se radi o nevjerojatno opremljenon i fleksibilnom uređaju. 

LUXMAN has been at the forefront of integrated amplifier design since releasing the first Japanease integrated amplifier, the SQ5A, in 1961.For over 50 years, LUXMAN has been confronting the challenges of balancing performance, function and design in an integrated amplifier body. These years of research and experience have resulted in the L-590AXII, the ultimate complete integrated amplifier design.With unprecedented spatial expression – and a sense of density particular to Class A design – outstanding realisation of tonal quality and penetrating audio ability have been achieved in this Class A integrated amplifier.The integrated L-590AXII introduces a combination of high grade technologies found in LUXMAN separate amplifiers, such as the original amplification feedback circuit ODNF4.0, LR independent block capacitors, discrete configured buffer circuits and the newly developed LECUA 1000.The L-590AXII is the peak of integrated amplifier design, amalgamating tried and tested know how and state of the art technology.The L-590AXII is the debut flagship model of integrated amplifier from LUXMAN to commemorate the 90th anniversary of this ground-breaking company.

The new LECUA1000 computerized attenuator

The newly developed integral LECUA1000 computerized attenuator with an 88 step amplifier circuit has been mounted in the volume adjustment unit, that is, for the first time as LUXMAN’s integrated amplifier, an essential part of the pre-amplifier circuit. This pre-amplifier circuit uses the same design as the top end control amplifier, the C-900u. The LECUA 1000 enables the sound volume to be adjusted smoothly with minimal deterioration of sound quality. A 3D layout has been introduced in the LECUA 1000 that allows substrates to be placed in three dimensions with the attenuator circuit directly connected to the amplification circuit, thereby minimizing routes and improving efficiency. Furthermore, this type of layout is extremely insensitive to external vibration and changes in sound quality caused by the volume level and has high durability.

ODNF version 4.0 innovative amplification feedback circuit

The ODNF (Only Distortion Negative Feedback) original amplification feedback circuit from LUXMAN features a fast primary slew rate and an ultra-wide bandwidth achieved through the feedback of distortion components only from output signals. The L-590AXII is equipped with the latest version of ODNF – Version 4.0 – in which the distortion characteristics at high frequencies as well as the S/N performance have been significantly improved. Version 4.0 also features a power amplifier circuit in which a 3-parallel push-pull structure with 3 stage Darlington is used, as featured in the LUXMAN M-700u power amplifier. The rated output of 30W + 30W (8 ohms) of pure Class A amplification sufficiently supports the impedance characteristics of a wide variety of loudspeakers. It is possible to achieve a mellow, expressive sound with an increased sense of density with drivability to speaker systems that is equivalent to separate amplifiers. 
* ODNF is an abbreviation for “Only Distortion Negative Feedback”.

Discrete buffer circuit

Discrete buffer circuits equivalent to the ones used in the LUXMAN C-900u, the flagship model of LUXMAN separate amplifiers, is mounted on the output stage of the pre-amplifier circuit, protecting the purity of the audio signals whilst simultaneously enhancing the drive force for the power amplifier. The L-590AXII is equipped with not only a custom power transformer and block capacitors but also with many custom built parts featuring sophisticated technologies. These custom parts and features have been improved through thorough listening tests on passive parts including resistors, input/output terminals and various wires.

 

Rated output 30W + 30W (8Ω), 60W + 60W (4Ω)
Input sensitivity/input impedance PHONO (MM): 2.5mV/47kΩ
PHONO (MC): 0.3mV/100Ω
LINE: 180mV/47kΩ
BAL.LINE: 180mV/55kΩ
MAIN-IN: 550mV/47kΩ
Output voltage RECOUT: 180mV, PRE OUT: 1V
Frequency response PHONO: 20Hz to 20kHz (±0.5dB)
LINE: 20Hz to 100kHz (+0, ±3.0dB)
Total harmonic distortion 0.005% or less (8Ω, 1kHz)
0.02% or less (8Ω, 20Hz to 20kHz)
S/N ratio (IHF-A) PHONO (MM): 91dB or more,PHONO (MC): 75dB or more
LINE: 107dB or more
Volume adjustment New LECUA1000
Amplification circuit ODNF 4.0
Output configuration Bipolar 3-parallel push-pull
Damping factor 320
Max. amount of tone control BASS: ±8dB at 100Hz
TREBLE: ±8dB at 10kHz
Power supply 230V~(50Hz) / 115V~(60Hz)
Power consumption 330W
260W (under no signal), 0.5W (at standby)
External dimensions 440(W) x 193(H) x 463(D) mm
front side knob of 20mm and rear side terminal of 37mm included in depth
Net weight 28.4kg (main unit)
Accessories Remote controller (RA-17A)
Power cable
Speaker terminal Supported Y-lug terminal dimension Width of part a: 16mm or less
Width of part b: 7mm or more
* Connection may not be performed 
depending on the shape of the 
Y-lug terminal.

Pošalji upit