With the new Hugo TT (Table Top) we’ve built on the extraordinary success of our genre-defining Hugo DAC/headphone amplifier. The new larger desktop-orientated device offers greater connectivity including a USB-B input, XLR outputs, two quarter inch headphone outputs, plus improved performance and features.
Compared to the more mobile Hugo, the Hugo TT gains a new larger chassis, remote control, an alphanumeric LED display with input/sample rate data, and improved sonic performance thanks to supercapacitors.
Advanced sample rate capability
The Hugo TT is ready to take advantage of today’s advanced studio-master-quality (DXD) music files allowing music lovers to experience music in true high definition, along with the best possible reproduction of CD-quality music. Hugo TT supports up to 32-bit/384kHz audio via coax and USB, and 24-bit/192kHz over optical, plus DSD64 on all inputs and DSD128 via coax or USB (all via DoP).
In a key upgrade over the original Hugo, the Hugo TT benefits from a high-quality asynchronous B-type USB connection for both the SD and HD USB input. With two further digital inputs: a (new) BNC coaxial and optical (TOSLink), any connected component with a digital output can benefit from the Hugo TT’s advanced sound quality.
To fully integrate with today’s digitally stored media, the new Hugo TT also has A2DP Bluetooth capability and uses a custom-made module with the aptX codec to feed a digital signal directly into the DAC circuitry, so even without cables, music can still be enjoyed.
Spartan 6 FPGA
The Hugo TT retains the same high-performance Spartan 6 FPGA that enabled Hugo to redefine the DAC genre in 2014. It has the same specification and measured performance as its mobile sibling, a device that “broke all records” for dynamic range in leading UK hi-fi magazine, Hi-Fi World, in the summer of 2014.
Being a home-orientated device, the Hugo TT has been designed to run continuously from the supplied charger, however Chord’s engineers have also improved the battery and added Supercap energy storage, a technology seen in F1 where supercacitors back-up the cars batteries by sharing the load and charge demands, thereby protecting them. They serve a similar purpose in the Hugo TT, extending the battery life as well as improving dynamics and demanding transients in recorded music.
Hugo TT key features
– Remote control allowing input (source) selection and volume control
– Alphanumeric LED display to show settings
– Double the battery capacity of Hugo
– 10,000,000uF (microfarads) of supercapacitor energy storage
– Fully balanced outputs using XLR connectors
– Single-ended RCA outputs
– BNC coaxial digital input
– Optical TOSLink input
– Full-sized B-type USB inputs for both SD USB and HD USB feeds
– Full galvanic isolation on the HD USB input right up to 384kHz
– Improved analogue stage output current for low distortion into low impedance loads
– 2x Quarter-inch jack headphone outputs
– 1x 3.5mm jack headphone output
Tap length filter: 98,304-tap 16FS WTA 1 – 10 element design
Connectivity (input): 1x USB Type-B, 2x Coax BNC, 2x Optical & Bluetooth
Connectivity (output): Stereo XLR, Stereo RCA, 2x 6.5mm Headphone jack & 1x 3.5mm Headphone jack
Connectivity (digital output): 2x DX BNC (expansion outputs)
PCM support: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 358.8kHz, 384kHz, 705.6 and 768kHz
DSD support: DoP DSD 64 to DSD 512 – native via Windows
Volume control: Digital
Line-level mode: Activated within the menu
Driver support: Driverless with Mac OS X and Linux, driver required for Windows OS
Dynamic range: 127dB ‘A’ weighted
Noise: 4 uV ‘A’ weighted (high gain), 1.7 uV ‘A’ weighted (low gain) with no measurable noise floor modulation
Distortion: 0.00008% @ 2.5 V 300Ω; 0.00016% @ 6 W 8Ω
Output power (unbalanced): (@1% THD) 288 mW RMS 300Ω; 7.3 W RMS 8Ω
Output power (balanced): (@1% THD) 1.15 W RMS 300Ω; 18W RMS 8Ω
Output impedance: 0.042Ω
Stereo separation: 9 V RMS 300Ω -138dB
Dimensions: 235mm x 223mm x 46mm